Auf schmalen Wegen zum Baggerloch


  • 37.8 km

    Distance

  • 280 m

    Elevation Gain

  • 280 m

    Elevation Loss

  • 136 m

    Max height

  • 44 m

    Min height

  • Road

  • Equip

  • Skill

  • Effort

Trail Description


Eine sehr nette Runde durch die Haard. Viele kleine schmale Wege. Mit dem MTB kein Problem. Essen im Lokal Schnieder´s oder schwimmen im Baggerloch. Viel Spass! Unsere Radbekleidung ist von www.cycwear.de Die ist ein Active Log der wie beschrieben gespeichert wird, Runterladen und im Track ist nun ein erhöhter gespeicherter Wert zu sehen. Die Daten auf speichern ablegen und mit Trackback abfahren.   Active Log Speicherbereich eines GPS-Gerätes für einen Tracklog. Im Active Log werden für jeden Trackpunkt, Koordinaten, Zeit, Datum, und, falls vom Gerät unterstützt, auch die Höhe gespeichert. Saved Log Speicherbereich eines GPS-Gerätes für einen reduzierten Tracklog. Ein Tracklog aus dem Active Log kann Im Saved Log gespeichert werden, um im Active Log freien Speicher für weitere Aufzeichnungen zu erhalten. Je nach Umfang des Tracklogs wird bei der Speicherung im Saved Log die Anzahl der Trackpunkte reduziert. Abhängig vom Gerät können auch Zeit-, Datumangaben und die Höhe gelöscht werden. Mit einem Tracklog aus dem Saved Log kann oftmals der genaue Weg nicht mehr nachvollzogen werden. Verwendung von Tracks Ein Beispiel zum Verwenden eines Tracks mit vielen Punkten (mehr als 500) auf dem GPSmap60 Es kommt vor, dass man im Internet einen interessanten Track findet, den man gerne nachfahren möchte. Um diesen Track komplett auf das Gerät zu bekommen, lädt man ihn in Mapsource und benennt ihn auf den Namen ACTIVE LOG um. Nach dem Übertragen steht er nicht in den saved Tracks auf dem Gerät sondern im aktiven Trackspeicher. Jetzt kann man ihn über die Tracback Funktion nutzen. Das Umbenennen ist nötig, da er sonst in den Saved Speicher landen würde. Diese sind aber bei diesem Gerät auf 500 Punkte begrenzt. Eine andere Variante besteht darin, die Anzahl Trackpunkte im Track mittels einer Funktion so weit zu reduzieren, bis der Track auch im Saved Log Platz findet. Dies kann bspw. mit einer Software wie Fugawi gemacht werden. Die Funktion beinhaltet einen Algorithmus, der selbständig entscheidet, welche Trackpunkte weggelassen werden können. In den meisten Fällten ist der Track danach noch ausreichend genau und kann problemlos für Tracback im Gerät verwendet werden.  


http://www.gps-tour.info/en/tracks/detail.55209.html


A very nice round by Haard. Many small narrow paths. With the MTB no problem. Food in the restaurant Schnieder & acute s or & nbsp; swim in the excavated hole. Have fun! Our cycling clothing is of www.cycwear.de This is an Active Log is stored as described, Download and Track an increased value stored can now be seen. Store data to save and exit with trackback. Active log storage area of ??a GPS device for a tracklog. In the Active Log and height is for each track point coordinates, time, date, and, if supported by the device is stored. Saved log storage area of ??a GPS device for a reduced tracklog. A track log from the Active log can be saved in the Saved Login to get free in the Active Log memory for further recordings. Depending on the size of the track logs the number of track points is reduced on-board storage Saved Log. Depending on the device and the time, date and the amount can be deleted. With a track log from the Saved Log can often no longer be traced the exact route. Using Tracks An example of using a track with many points (more than 500) on the GPSMAP60 It happens that one finds an interesting track on the internet, which one would like to descendants. To get this track completely on the unit, you load it into Mapsource and rename it to the name ACTIVE LOG. After the transfer, he is not in the saved tracks on the device but on the active track log. Now you can use it on the TracBack function. The rename is necessary, since it would otherwise end up in the Saved storage. These are limited in this unit on 500 points. Another variant is the number of track points in the track to reduce as much use of the function to the track in the Saved Log takes place. This can for example. Using software such as Fugawi be made. The function includes an algorithm that decides autonomously which track points can be omitted. In most of the track is then precipitated yet sufficiently accurate and can be used easily for TracBack in the device.


http://www.gps-tour.info/en/tracks/detail.55209.html

Map/Elevation

Pictures


Download

Download the GPS file

Download the complete page